NguyenHuuTrong
New Member
SBSettings Beta v0.90 is here!
Còn trong bản beta nhưng những góp ý của các bạn sẽ rất quan trọng
Chức năng chính:
1) Đổi tên Wifi, Edge, và 3g to Wi-Fi, EDGE, and 3G
2) Đổi tên “Extras” menu từ “SBSettings” thành “Extras”
3) Cố định tất cả các chức năng chính tránh việc "vọc phá" trực tiếp =))
Cách cài đặt:
1) Vào cydia và cài libhide. hoặc, dùng Winscp ssh run: apt-get install libhide.
2) Chắc rằng iPhone đã cài substrate. Nếu ko dùng winscp gõ lệnh: apt-get install mobilesubstrate (hay cài winterboard)
3) Cài sbsettings_toggles_pack1_1.10 trước. Down file deb trên Dùng winscp chép vào /tmp trên iPhone. và gõ lệnh “dpkg -i sbsettings_toggle_pack1_1.0.deb”. (Note: you may need to right click and “save as” to save the deb. Some of the round-robin servers mime types aren’t set so it may try to show in the browser).
4) Xong, Down sbsettings_0.90b.deb, dùng winscp chép vào /tmp trên iPhone và gõ lệnh “dpkg -i sbsettings_0.90b.deb”.
5) Respring bằng tay hoặc dùng app hộ trợ. Nếu bạn ko Respring có thể sẽ ko thành công ...
Vài ngày nữa sẽ có trên Cydia
)
Instructions for use:
- Slide across statusbar to show the window. (Tap once with two fingers seems to work also) Tap the close button to dismiss the window.
- The big buttons are toggles. Red is “OFF” Green is “ON”.
- The “more” button brings up the settings app which lets you configure which settings you want available, hide icons, and other bossprefs like things.
- The “refresh” button will refresh the state of the icons in case it gets out of sync.
Known issues:
1) The icons are refreshed only on respring. It is possible for them to get out of sync. This is by design because it is a significant performance drain to constantly refresh these things. But you may have to occasionally press the refresh button if you believe the states are incorrect. One example is toggling airplane mode on, and the WIFI button stays lit green. (This may be fixed in near future by adding a phone-only airplane button).
2) The SSH toggle is very slow after the iPhone has sat idle for a bit. It does work just be patient.
3) The “add your own toggle” is not yet designed. Be patient.
4) There are times where the iPhone is very low on memory and bringing up the window is not very helpful. Example is maps app while its locating you or some cases inside safari.
5) The SSH and “more” button are implemented by launching apps. Therefore, they will only work if you have no other app loaded.
Còn trong bản beta nhưng những góp ý của các bạn sẽ rất quan trọng
Chức năng chính:
1) Đổi tên Wifi, Edge, và 3g to Wi-Fi, EDGE, and 3G
2) Đổi tên “Extras” menu từ “SBSettings” thành “Extras”
3) Cố định tất cả các chức năng chính tránh việc "vọc phá" trực tiếp =))
Cách cài đặt:
1) Vào cydia và cài libhide. hoặc, dùng Winscp ssh run: apt-get install libhide.
2) Chắc rằng iPhone đã cài substrate. Nếu ko dùng winscp gõ lệnh: apt-get install mobilesubstrate (hay cài winterboard)
3) Cài sbsettings_toggles_pack1_1.10 trước. Down file deb trên Dùng winscp chép vào /tmp trên iPhone. và gõ lệnh “dpkg -i sbsettings_toggle_pack1_1.0.deb”. (Note: you may need to right click and “save as” to save the deb. Some of the round-robin servers mime types aren’t set so it may try to show in the browser).
4) Xong, Down sbsettings_0.90b.deb, dùng winscp chép vào /tmp trên iPhone và gõ lệnh “dpkg -i sbsettings_0.90b.deb”.
5) Respring bằng tay hoặc dùng app hộ trợ. Nếu bạn ko Respring có thể sẽ ko thành công ...
Vài ngày nữa sẽ có trên Cydia
)Instructions for use:
- Slide across statusbar to show the window. (Tap once with two fingers seems to work also) Tap the close button to dismiss the window.
- The big buttons are toggles. Red is “OFF” Green is “ON”.
- The “more” button brings up the settings app which lets you configure which settings you want available, hide icons, and other bossprefs like things.
- The “refresh” button will refresh the state of the icons in case it gets out of sync.
Known issues:
1) The icons are refreshed only on respring. It is possible for them to get out of sync. This is by design because it is a significant performance drain to constantly refresh these things. But you may have to occasionally press the refresh button if you believe the states are incorrect. One example is toggling airplane mode on, and the WIFI button stays lit green. (This may be fixed in near future by adding a phone-only airplane button).
2) The SSH toggle is very slow after the iPhone has sat idle for a bit. It does work just be patient.
3) The “add your own toggle” is not yet designed. Be patient.
4) There are times where the iPhone is very low on memory and bringing up the window is not very helpful. Example is maps app while its locating you or some cases inside safari.
5) The SSH and “more” button are implemented by launching apps. Therefore, they will only work if you have no other app loaded.
