Với WM thì bạn có 2 cách cài PM:
C:\Boot\JFlash_MM>start.bat
C:\Boot\JFlash_MM>jflashmm pxa27x32 ebo_a.nb0 N 0 PAR
JFLASH Version 5.01.007
COPYRIGHT (C) 2000 - 2003 Intel Corporation
PLATFORM SELECTION:
Processor= PXA27x
Development System= Mainstone
Data Version= 1.00.001
PXA27x revision ??
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: FFFF
Lower half reads: 0
Failed to read the Flash ID. Retrying 4 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: 0
Failed to read the Flash ID. Retrying 3 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: 0
Failed to read the Flash ID. Retrying 2 more times...
Upper and Lower flash memory ID does not match.
You may have a damaged flash memory.
Upper half reads: 90
Lower half reads: 0
Failed to read the Flash ID. Retrying 1 more times...
Failed to read the Flash ID. Retrying 0 more times...
Cannot open input file: Flash_0_2_32.dat
This program supports flash devices defined by DAT files
contained in the same directory as the executable program.
If the file cannot be opened, there are four possibilities:
1 - The flash device installed is not supported.
2 - The flash device is a licensed product.
3 - The device ID could not be read, resulting in a poorly
constructed filename. The first numeric value in the
filename is the device ID. Verify this value with the
component specification.
4 - The memory bus is not functional. Check all CPLD and FPGA
devices. Make sure that you are using the correct
platform data file.